Sub-header

Side Enclosure Profiles

  • Side Enclosure Profile Application
  • Side Enclosure Box Example
  • Opening a Side Extrusion Enclosure
  • Exploded View of Side Extrusion Enclosure
Click image to enlarge
Make a Custom Enclosure in Minutes!!
  • These extrusions make up 2 parallel sides of customized enclosure
  • Stamdard sheet stock of thickness 1.6mm or 1/16" make up the other 2 sides
  • A full enclosure requires a front and rear panel to hold enclosure together
  • The length is controlled by the length of the extrusion - up to 3m long.
  • Available in standard lengths of 1, 2 and 3m with custom cuts available.
  • A built in card guide is designed to hold 1.6mm or 1/16" thick circuit boards with Eurocard widths of 100 mm.and any length
  • The 42mm side profile can accomodate 1/16" or 3/32" thick circuit boards
  • The 56mm side profile can accomodate 1/16" thick circuit boards
  • Corner "cross" is designed for M3 tap or M3 self-tapping screw
  • The enclosure is held together by the face plates which are screwed to the corners with M3 screws.
  • Access for repairs or assembly is very easy - just remove front or rear panel and slide out the top or bottom
  • The aluminum extrusion sides have a natural cooling effect
  • Download the 10x42 CAD.DXF
  • Download the 10x56 CAD.DXF
42x10mm Side Enclosure Extrusion Profile Dimensions

42x10 mm Side Enclosure Extrusion Profile

56x10mm Side Enclosure Extrusion Profile Dimensions

56x10 mm Side Enclosure Extrusion Profile

 

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us