Techno reserves the right to change all specifications, designs and documentation without prior notice.
Travel
Part Number
Standard
HXP3VPM48048010
High Speed
HXP3VPM48048011
4x4
Water Table
HT5031-908-WTASY
Standard
HXP3VPM48096010
High Speed
HXP3VPM48096011
4x8
Water Table
HT5031-908-WTAS2
Standard
HXP3VPM59012010
High Speed
HXP3VPM59012011
5x10
Water Table
HT5031-908-WTAS3
NOTE: High speed version is more suitable for cutting thinner sheet metal and
aluminum under 10 AWG.
Plasma Machines listed above do not include a torch.
Available Hypertherm Plasma Torch Options:
Depth of cut
In Steel/Al
Speed with
max cut
Current
capacity
Part number
Powermax 45
3/8
32ipm
20-45A
H24H00-PM0045
Powermax 1000
½
27ipm
20-60A
H24H00-PM1000
Powermax 1250
5/8
26ipm
25-80A
H24H00-PM1250
Powermax 1650
¾
26ipm
30-100A
H24H00-PM1650
All torches include Automatic Torch Height Control and Torch touch-off sensor and a set
of consumables.
Water Table Option
There is an option for a water table to be inserted on the plasma machine. The material
support beams go in the water table to still raise the material over the water. There is a
drain valve on the water table to allow for cleaning. The water table can eliminate up to
80% of the fine dust that is created during plasma cutting. There is no extra charge for
shipping the water table WITH the plasma machine BUT because of its size, shipping
the water table separately will incur a significant shipping charge.