Techno Linear Motion Catalogwww.techno-isel.comTechnoInc.63Gantry System FB2015027040054067130NOTES ON SPECIFICATIONS:Stepper motor is HL2600M210001 for models 027, 040, 054, 067 and HL2600M210002for Model 130, as described on page ???, half-step mode, with 4.5A / phase, 40V chopper driver. 200W Servo motor is model HZ2600M1050XY3 as described on page ???, operating with 6A / 80V chopper amplifier and 1000 line encoder operating in quadrature. These figures will of course vary with different loads, amplifiers and acceleration profiles provided by the controller.183 (7.2)150 (5.9)EABBDCA()YTRAVELNOTE:Dimensions in ( ) are inch.ModelTravelXmm (in)Ymm (in)Amm (in)Bmm (in)Cmm (in)Dmm (in)Emm (in)290 (11.4)530 (20.9)530 (20.9)530 (20.9)780 (30.7)1030 (40.6)500 (19.7)750 (29.5)750 (29.5)750 (29.5)1000 (39.4)1250 (49.2)666 (26.2)946 (37.2)1196 (47.1)1446 (56.9)1446 (56.9)1846 (72.7)900 (54.4)1210 (47.6)1210 (47.6)1210 (47.6)1460 (57.5)1710 (67.3)600 (23.6) 850 (33.5)1100 (43.3)1350 (53.1)1350 (53.1)1750 (68.9)125 (4.9)190 (7.5)190 (7.5)190 (7.5)190 (7.5)190 (7.5)350 (13.8) 500 (19.7)750 (29.5)1000 (39.4)850 (33.5)1250 (49.2)Servo152 mm / sec (6 in / sec)113 kg (250 lb)0.0025 mm (.0001 in)RepeatabilityAccuracyMax. Z-Axis LoadMotor DrivesNo-Load SpeedThrust Force at Low SpeedResolutionSPECIFICATIONS±0.01 mm (± .0004 in)± 0.1 mm / 300 mm (± .004 in / 12 in)22.7 kg (50 lb)Stepper127 mm / sec (5 in / sec)91 kg (200 lb)0.0125 mm (.0005 in)