Techno Linear Motion Catalog72101102201189 (7.4)257 (10.1)257 (10.1)620 (24.4)620 (24.4)970 (38.2)Motor DriveXNo MotorVServo MotorSStepper MotorC Crank HandleBridge Mounted SlideFEATURESEXAMPLE: To order a Bridge Mounted Slide with Stepper Motor (S),5 mm Pitch Ball Screw (B) & 500 mm Travel (201), theCatalog Number is HL31SBM24220105.CATALOG NUMBERHL31000 0M24205Screw TypeBBall ScrewXNo ScrewLengthmm (in)ModelTravelmm (in)0290 (11.4)290 (11.4)0500 (19.6)Heightmm (in)EXAMPLE OF XYZPositioning system with bridgemounted Y-slide(X- & Z-slides not included)EXAMPLE OF XYPositioning system with bridgemounted Y-slide(X-slide not included)EXAMPLE OF YZPositioning system with bridgemounted Y-slide(Z-slide not included)3 Heavy cast aluminum side plates support the axisabove a work surface3 Home reference and far end limit switch with ±0.01 mmrepeatability3 Features 2 patented double linear rails and 4 patenteddouble bearing blocks3 Fitted with plastic lip seals to guard againstcontaminants3 All models with stepper motor option feature125 oz in stepper motor, model HL2600M2100013 All models with servo motor option feature motormodel HZ2600M1050XY3 with line driver opticalrotary encoder, 1000 line3 Standard anti-backlash ball screw and nut, 16 mmdiameter with 5 mm pitch3 Work surface is flat milled aluminum 220 x 175 x8 mm with 8 drilled and tapped M6 mounting holes3 Choice of two travel lengths with two workingheights3 Ready to accept Z-slide and standard-duty slidefor XY, YZ and XYZ configurationsBRIDGE MOUNTED SLIDE SELECTIONFor mating connectors and cables, see page 166. For motor standoffs and couplings, see page 132.