Home Page
H834 Catalog Page
Techno Linear Motion Catalog 75 Standard-Duty Slide NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M210001 as described on page 152, operating in half step mode, with 4.5A / phase,40V chopper driver.  Servo motor is model HZ2600M1050XY3 as described on page 164, operating with 6A / 80V chopper amplifier and 1000 line encoder operating in quadrature. These figures will, of course, vary with different loads, amplifiers and acceleration profiles provided by the controller. Repeatability Accuracy Vertical Static Load Capacity ± 0.01 mm (± .0004 in) ± 0.1 mm / 300 mm (± .004 in / 12 in) 113 kg (250 lb) Ball Screw Pitch mm Thrust Force at Low Speeds, kg (lb) No Load Speed mm/sec (in/sec) Resolution mm (in) Motor Drive   5 10 20   5 10 20   91 (200)   45 (100)   23   (50) 113 (250)   57 (125)   28   (63) 127   (5) 254 (10) 510 (20) 152   (6) 305 (12) 610 (24) 0.0125 (.0005) 0.025   (.001) 0.05     (.002) 0.0025 (.0001) 0.005   (.0002) 0.01     (.0004) Stepper Motor Servo Motor SPECIFICATIONS 43 L1 220 8 85 8 6.35 20.5 200 185 92.5 175 70 50 166 143 STEPPER MOTOR HOUSING 18 29.5 52.5 68 87.5 4, M6 TAPPED HOLES 8 mm DP 134.5 115 92.5 50.5 17.5 67.5 117.5 167.5 8 M6 TAPPED HOLES 8 mm DP 50 mm apart 4 REAMED HOLES Ø6 mm on 100 mm SQ.