Home Page
H834 Catalog Page
Techno Linear Motion Catalog 77 for Heavy Loads ± 0.01 mm (± .0004 in) ± 0.1 mm / 300 mm (± .004 in / 12 in) 180 lb / bearing block Repeatability Accuracy Vertical Static Load Capacity NOTES ON SPECIFICATIONS:   Stepper motor is model HL2600M3989001 as described on page 152, operating in half step mode, with 4.5A / phase, 40V chopper driver. Servo motor is model HZ2600M0242601 as described on page 164, operating  with  6A  /  80V  chopper  amplifier  and  1000  line  encoder operating in quadrature.  These figures will, of course, vary with different loads, amplifiers and acceleration profiles provided by the controller. Motor Drive Ball Screw Pitch mm Resolution mm (in) No Load Speed mm/sec (in/sec) Thrust Force @ Low Speeds kg (lb)   2.5   5 10 20   2.5   5 10 20 Servo Motor Stepper Motor 182 (400)   91 (200)   45 (100)   23   (50) 226 (500) 113 (250)   57 (125)   28   (63)   64   (2.5) 127   (5) 254 (10) 508 (20)   77   (3) 152   (6) 305 (12) 610 (24) 0.0062 (.0002) 0.0125 (.0005) 0.0250 (.0098) 0.0500 (.0197)   0.0013 (.00005) 0.0025 (.0001) 0.0050 (.0002) 0.0100 (.0004) SPECIFICATIONS 27 25 L 15 77.7 75 STEPPER MOTOR MODULE 200 47.2 47.2 49 47.2 79.5 4 x M5 4 x M5 150 225 47.2 Ø8h7 Heavy-Duty Slide 2