Home Page
H834 Catalog Page
Techno Linear Motion Catalog 83 Stepper 1 m / sec 20 lbs 0.05 mm (.002 in) SPECIFICATIONS ± 0.1 mm (± .004 in) ± 0.2 mm / m (± .002 in / 10 in) 22.5 kg (50 lbs) NOTES ON SPECIFICATIONS:   Stepper motor is model HL2600M210022 as described on page 152, operating in half step mode, with 4.5A / phase, 40V chopper driver. Servo motor is model HZ2600M0242601 as described on page 164, operating with 6A / 80V chopper amplifier and 1000-line encoder operating in quadrature.  These figures will, of course, vary with different loads, amplifiers and acceleration profiles provided by the controller. Repeatability Accuracy Vertical Static Load Capacity Motor Drives No Load Speed Thrust Force at Low Speed Resolution Servo 1.2 m / sec 25 lbs 0.01 mm (.0004 in) Narrow Profile Belt Drive Slide 1 58 35 4 x M6 47.2 50 L1=L+100 mm 92 10.5 10.5 47.2 4 x M5 40 Length L-4 mm 60 6.5 6 4.5 80 10.5 104 8 27 17 70 6 x M6 100 125 50 65 CARRIAGE PLATE END OF TRAVEL Ø6.35 Carriage Plate