Techno Linear Motion Catalog79Narrow Profile Slide 1NOTES ON SPECIFICATIONS: Stepper motor is model HL2600M210001 as described on page 152,operating in half step mode, with 4.5A / phase, 40V chopper driver.Servo motor is model HZ2600M1050XY3 as described on page 164,operating with 6A / 80V chopper amplifier and 1000 line encoderoperating in quadrature. These figures will, of course, vary withdifferent loads, amplifiers and acceleration profiles provided by thecontroller.RepeatabilityAccuracyVertical Static Load CapacitySPECIFICATIONS±0.01 mm (±.0004 in)±0.1 mm / 300 mm (±.004 in / 12 in)23 kg (50 lb)Ball Screw PitchmmThrust Force atLow Speeds, kg (lb)No Load Speedmm/sec (in/sec)Resolutionmm (in)Motor Drive510205102091 (200)45 (100)23 (50)113 (250)57 (125)28 (63)127 (5)254 (10)510 (20)152 (6)305 (12)610 (24)0.0125 (.0005)0.025 (.001)0.05 (.002)0.0025 (.0001)0.005 (.0002)0.01 (.0004)StepperMotorServoMotor20.51LENGTH L-4 MM88922529TRAVEL = LENGTH L-200MMTable Plate End of TravelTable Plate End of Travel8448X7117.552.52147.210246M547.2701256 x M650505065143STEPPER MOTOR MODULE1667010.56.56.52X1:1Ø12Ø6.35 H7Ø50DETAILS OF T-SLOT