Techno Linear Motion Catalog80Motor DriveSStepper, 150 oz×inVServo, 120 WX No motorHL31NPMBHEAVY-DUTY SLIDE SELECTIONCATALOG NUMBEREXAMPLE:To order a Narrow Profile Slide 2 with ServoMotor (V), 10 mm Ball Screw (B), 1 screw and 2carriages (3), and 390 mm length, the CatalogNumber is HL31NPMB0390103V.Pitch Code00 No screw022.5 mm055 mm1010 mm2020 mmFEATURES3 Constructed from a single rigid aluminum extrusionprofilewith aluminum end plates3 Compact, modular design with T-slotted extrusions foreasy mounting3 Available with 150 ozin stepper motor or 120W servomotor3 Fitted with plastic seals to guard against contaminants3 Home reference and far end limit switch with arepeatability of ± 0.01 mm3 Two precision steel rails Ø12h6 with either one ortwo single piece steel bearing blocks hardened toHRC 62 ± 23 Anti-backlash Ø16 mm ball screw drives with pitchesof 2.5, 5, 10 and 20 mm available3 Linear carriage is capable of speed up to 5 m/sec.Lengthmm (in)CodeLengthmm (in)Code039004900590069007900890099010901190 (46.9)1290 (50.8)1390 (54.7)1490 (58.7)1790 (70.5)1990 (78.3)2490 (98.0)2990 (117.7)11901290139014901790199024902990390 (15.4)490 (19.3)590 (23.2)690 (27.2)790 (31.1)890 (35.0)990 (39.0)1090 (42.9)Travel*mm (in)122 (4.8)222 (8.7)322 (12.7)422 (16.6)522 (20.6)622 (24.5)722 (28.4)822 (32.4)Travel*mm (in)922 (36.3)1022 (40.2)1122 (44.2)1222 (48.1)1522 (59.9)1722 (68.0)2222 (87.5)2722 (107.2)*Travel spec is based on a slide with 2 bearings. For a slide with only onebearing, add 130 mm (5.1 in) to the travel. Dimension L is unchanged.Setup21 Carriage3 2 Carriages(Carriage Plate Included)For mating connectorsand cables, see page 166.For motor standoffs andcouplings, see page 132.Narrow Profile Slide 2for Heavy Loads